Container Ship Propeller 5000mm

You are here: Home » Products » Container Ship Propeller » CSP » Container Ship Propeller 5000mm
Propeller Model: CSP5
Propeller Type: FPP
Application ship type : Container Ship
Diameter: 5000mm
Pitch: 3750mm
Ratio: 0.52
Number of leaves : 4
Material Type : Cu1,Cu3,Cu4
Direction: Turn left and right
Certification selection: ABS、BV、NK、CCS
Lead Time: 15-30 working days
Payment Terms: T/T ,L/C

 CSP5 Propeller 5000mm

CSP5 Propeller 5000mm


CSP5 Propeller 5000mm

1. Advanced design and excellent manufacturing: meets the harsh conditions, high strength and heavy load operation capacity.

2. Rich product specifications:meet different ship types requirements and different working environments.

3. High quality:the products was tested by 60 tons of computer hydraulic universal testing machine,2000kg balancing machines and spectrometer and other advanced detection equipment.

4. CCS,BV,ABS,NK certificates.

Model
Propeller type
Application ship type
Diameter
Pitch
Ratio
Number of leaves
CSP1
FPP
Container Ship
1000mm
750mm
0.48
4
CSP2
FPP
Container Ship
2000mm
1650mm
0.48
4
CSP3
FPP
Container Ship
3000mm
2350mm
0.48
4
CSP4
FPP
Container Ship
4000mm
3400mm
0.55
4
CSP5
FPP
Container Ship
5000mm
3750mm
0.52
4
CSP6
FPP
Container Ship
6000mm
4850mm
0.5
4
General Information of CSP5 Propeller 5000mm
Model CSP5
Propeller Type FPP
Application ship type Container Ship
Diameter 5000mm
Pitch 3750mm
Ratio 0.52
Number of leaves 4
Direction Turn left and right
Certification selection ABS、BV、NK、CCS
Material Type Cu1,Cu3,Cu4
Other Information of CSP5 Propeller 5000mm
Propeller Type MAU、B、KA、High N、Side-spin
Optional Diameter Range 1000mm-5000mm
Optional propeller speed range <1500 rpm
Delivery Date 30-60 working days
Warranty Within 12 months of arrival in destination port
Installation and Commissioning Installation and commissioning by the customers

Working together with our business partner Hispeed, Hangzhou Advance and DCEC |CCEC|Deutz marine engine.we are able to provide a complete engine power pack for all shipyard customers all over the world. We can provide the complete service from design, supply, installation to commissioning ; for more information, please visit www.marine-engine.com, www.hispeed-boat.com, www.advance-gearbox.com.Fast Transmission

User Guidelines

1.Stern shaft cone and propeller cone hole should be bedding-in, after bedding-in and inspection should be 75% of the area of uniform contact, 25X25 mm2 area of not less than 2 to 4 contact points.

2.Use a drive key to connect the propeller and the stern shaft, wipe the mating surface, move the stern shaft to the corresponding position and set the “O” ring, turn the stern shaft to the key up, in the propeller cone Surface coated with butter, but with the surface shall not be painted butter.

3.Raise the propeller and align the center of the taper hole with the center of the stern shaft and set the propeller over the stern shaft. When the stern shaft through the cone hole out of the propeller end face, immediately put the stern shaft nut and tighten, large propeller nut tightening work generally with a hammer percussion wrench, you can also use the air hammer for percussion , The effect is better.

4.In order to prevent the seawater from penetrating into the mating surface of the stern shaft cone and the propeller cone, a watertight device must be fitted between the front end face of the propeller hub and the rear end flange of the anti-corrosion sleeve. , Oil and resistant to seawater corrosion, Shore hardness of 65 ~ 70 water bottle.

HISPEED FULL RANGES OF PRODUCTS

Militery Boat

Amphibious Boats

Bulletproof Boats

Missile Boats

Luxury Yacht

Sports Yacht

Leisure Yacht

Business Yacht

Patrol Boat

70kn Patrol Boat

Coast Guard Boat

Over 120 types

Fishing Boat

Multi-fuction

High speed

High performance

Unmanned Boat

High speed

High-tech

Independent design

Sailing Boat

Single deck

Independent design

High speed

Work Boat

High speed

Multi-fuction

Deep V type

Self-righting Boat

Selfrighting

High-speed

Deep V type

Fire Boat

High airworthiness

High mobility

High speed

Floating Island

Floating Villa

Floating Port

Floating Base

EMAC INTERNATIONAL GROUP

Headquartered in the special economic zone of Shenzhen, China, and operating globally, EMAC International Group concentrate in providing power driven system solution as well as complete equipment for transportation, industrial, maritime and energy application filed.Originating from EMAC International Trade Co., EMAC International Group (Shenzhen Sinogen Power Technology Ltd) was established in 2010. To meet the needs of our customers. EMAC now has three subsidiaries, three domestic joint ventures, two overseas joint ventures and five independently registered brand trademarks. This has enabled us to work across 160 countries and establish relationships with over 5000 business partners.
EMAC’s Brands and Partners

Other Items in this category
Request Form
Name: 
*
Email: 
*
Country: 
*
Message: 
Verification:  0 + 5 = ?
Please enter the answer to the sum & Click Submit to verify your registration.
 
Copyright 2008-2022 EMAC International All Rights Reserved.
Sitemap | Top↑